Showing all 18 results

  • Thread Terminals

    Stainless steel - AISI 316

    The wide range of threaded Blue Wave terminals are engraved with wire size and swage depth making them easy to use when pressing or swaging them onto the wire. The terminals are available with left handed or right handed threads, and also. on request, with split pin hole (see details below on this page), or UNF thread! Threaded terminals are used to put tension on a wire, either with the help of nuts and washers or as part of a rigging screw.


    Technical Specifications
  • Thread Terminals – Small

    Stainless steel - AISI 316

    Blue Wave’s small thread terminals are for lighter architectural fixing of wires. The focus of the design is the size. Overall dimensions have thus been reduced to a minimum. The small fittings are suitable for hand crimping with Blue Wave Arctool1ACC & Arctoo8, see product page, or roll swaged using a standard machine and smaller die.


    Technical Specifications
  • Thread Forks Welded

    Polished Stainless steel - AISI 316

    Welded forks with thread and pin for rigging screws, inside thread parts or other terminations. Available with left handed and right handed thread -also UNF sizes on request.


    Technical Specifications
  • Thread Fork Welded – Small

    Stainless steel - AISI 316

    Small welded forks with thread and pin for the small rigging screw bodies, inside thread parts or other terminations. Available with left handed and right handed threads, incl. locking nut.


    Technical Specifications
  • Thread Forks – Machined

    Polished Stainless steel - AISI 316

    Larger machined forks with thread and pin for rigging screws, inside thread parts or other terminations. Available with left handed and right handed threads – also UNF sizes on request.


    Technical Specifications
  • Thread Fork – Machined – Small

    Stainless steel - AISI 316

    Small machined forks with thread and pin, for the small rigging screws, inside thread parts or other terminations. Available with left handed and right handed threads, incl. locking nut.


    Technical Specifications
  • Thread Eyes

    Polished Stainless steel - AISI 316

    Thread eyes are for use in rigging screws, inside thread parts or other similar terminations. Available with left handed and right handed threads – also UNF sizes on request.


    Technical Specifications
  • Thread Eyes – Small

    Stainless steel - AISI 316

    Small thread eyes for use with the small rigging screws body, inside thread parts or other terminations.


    Technical Specifications
  • Thread Eye

    Stainless steel - AISI 316

    Small thread eyes for use with the small rigging screws body, inside thread parts or other terminations.


    Technical Specifications
  • Threaded Toggle

    Polished Stainless steel - AISI 316

    Use the threaded toggles to terminate a rigging screw or other attachment where flexible angles are required or there is a risk of failure due to sideways articulation fatigue e.g. with outdoor canopies etc. Available with left handed and right handed threads – also UNF sizes on request.


    Technical Specifications
  • Threaded Wall Toggle

    Polished Stainless steel - AISI 316

    Wall Toggle with left handed thread and pin, for rigging screws, inside thread parts or terminations to flat surfaces.


    Technical Specifications
  • Swageless Thread Terminals

    Polished Stainless steel - AISI 316

    Safe, reliable and machine free swaging of wire, with the fastest swageless system on the market. The threaded swageless terminal is easy to use and ideal for site work where a professional swaging would normally be required. The swageless thread terminal is Lloyds approved and also available, on request, with UNF thread!Lloyds type approval logo1


    Technical Specifications
  • DIY Terminal

    Stainless steel - AISI 316

    The Do It Yourself terminal is a simple alternative to the Swageless terminals, as it is fixed to the wire only by use of “allenheaded” screws. Break loads are , therefore , lower than average! The terminals are delivered with external right handed thread stud only, but as this can be removed, they can be combined with the rest of the WDS program and thus offer a wide range of possible DIY solutions. The fittings can be reused and are as such a good solution for private use…


    Technical Specifications
  • Double Threaded Pin

    Polished Stainless steel - AISI 316

    The opposite rigging screw would be a combination of the double threaded pin and inside threaded terminals locked at either side. This is usually used where extra adjustment lengths are needed or when pre-fitted wires are manufactured too short !


    Technical Specifications
  • Thread Pin

    Stainless steel - AISI 316

    The threaded pins are a useful way to solve a problem where the wire may need to be lengthened… connect it to an inside thread wall anchor and use an inside thread terminal or rigging screw body for tensioning.


    Technical Specifications
  • Domehead Screw

    Stainless steel - AISI 316

    Threaded domehead screws can be used for end termination and adjustment of a wire e.g. combined with inside thread terminals. The ball for domehead is particularly useful for angled installations.


    Technical Specifications
  • Dual Thread Screw

    Stainless Steel - AISI 304

    The dual thread pin allows direct installation into wood and if combined with the correct raw plug it is attachable to almost any wall. Ideal for inside thread solutions.


    Technical Specifications
  • Dual Thread Screw Tong

    WDS Tool for dualscrew


    Technical Specifications