Showing all 16 results

  • Welded Fork Terminals

    Polished Stainless steel - AISI 316

    The wide range of hand welded fork terminals by Blue Wave has been setting standards for many years. Featured here are the most common size / fork variations: – all with wire size and swage depth marking. Fork terminals are amongst the most commonly used wire end fittings, they are normally attached to pre drilled anchor plates or steel constructions. Also used in combination with toggles, eyes or U-bolts.


    Technical Specifications
  • Fork Terminals – Welded – Small

    Polished Stainless steel - AISI 316

    Blue Wave’s small fork terminals are for lighter architectural fixing of wires.The focus of the design is the size. Overall dimensions have thus been reduced to a minimum. The small fittings are suitable for hand crimping with Blue Wave Arctool- 1ACC & Arctoo8, see page 61, or roll swaged using a standard machine and smaller die.


    Technical Specifications
  • Fork Terminals – Machined

    Polished Stainless steel - AISI 316

    As demand for larger wire sizes has been growing, so has the range of larger machined fittings by Blue Wave. The machined forks are, as most fittings by Blue Wave, marked with wire size and swage depth marking for ease of use.


    Technical Specifications
  • Fork Terminals – Machined – Small

    Stainless steel - AISI 316

    Blue Wave’s small fork terminals are for lighter architectural fixing of wires.The focus of the design is the size. Overall dimensions have thus been reduced to a minimum. The small fittings are suitable for hand crimping with Blue Wave Arctool- 1ACC & Arctoo8, see product page, or roll swaged using a standard machine and smaller die.


    Technical Specifications
  • Spelter Socket – Fork

    Polished Stainless steel - AISI 316

    The spelter socket is a stainless steel product. Using the well known & tested method of brooming / spreading the wire and glueing it in a socket by use of Wirelock®, Blue Wave produces a flexible range of end fittings with high break loads and no need for special tools.


    Technical Specifications
  • Thread Terminals

    Stainless steel - AISI 316

    The wide range of threaded Blue Wave terminals are engraved with wire size and swage depth making them easy to use when pressing or swaging them onto the wire. The terminals are available with left handed or right handed threads, and also. on request, with split pin hole (see details below on this page), or UNF thread! Threaded terminals are used to put tension on a wire, either with the help of nuts and washers or as part of a rigging screw.


    Technical Specifications
  • Thread Terminals – Small

    Stainless steel - AISI 316

    Blue Wave’s small thread terminals are for lighter architectural fixing of wires. The focus of the design is the size. Overall dimensions have thus been reduced to a minimum. The small fittings are suitable for hand crimping with Blue Wave Arctool1ACC & Arctoo8, see product page, or roll swaged using a standard machine and smaller die.


    Technical Specifications
  • Eye Terminals

    Polished Stainless steel - AISI 316

    Blue Wave Eye terminals are engraved with the wire size and swage depth, making them easier to work with and to press or swage onto the wire. Eyes are mainly used as an attachment to rigging screws or forks.


    Technical Specifications
  • Eye Terminals – Small

    Stainless steel - AISI 316

    Blue Wave’s small Eye terminals are for lighter architectural terminations. The focus of the design is the size. Overall dimensions have thus been reduced to a minimum. The small fittings are suitable for hand crimping with Blue Wave Arctool Acc1 & Arctool8, see product page, or roll swaged using a standard machine and smaller die.


    Technical Specifications
  • Toggle Terminal

    Polished Stainless Steel – AISI 316

    The flexible Blue Wave toggle terminal is marked with wire size & wire-hole depth making it easier to work with and to press or swage onto the wire. Its uses are for diagonal or angle installations and also to minimize the risk of fatigue due to sideway loads.


    Technical Specifications
  • Wall Toggle Terminal

    Polished Stainless steel - AISI 316

    The flexible wall toggle terminal is marked with wire size & wire-hole depth for ease of use.


    Technical Specifications
  • Inside Thread Terminals

    Polished Stainless steel - AISI 316

    Often found to be a good alternative to a standard rigging screw are the inside thread terminals. The terminals are available with right handed threads and left handed on request! For ease of use when pressing or swageing onto the wire, the terminals are marked with wire size and swage depth.


    Technical Specifications
  • Inside Thread – Small

    Stainless steel - AISI 316

    The small inside thread terminals are for lighter architectural fixing of wires. The terminals are available with left handed and right handed threads, with dimensions reduced to a minimum. These terminals are suitable for hand crimping with Blue Wave Arctool ACC1 & Arctool8, see product page.


    Technical Specifications
  • Ball Terminal

    Polished Stainless steel - AISI 316

    Blue Wave’s Ball terminals are marked with wire size and wirehole depth, to make it easier to work with and press or swage onto the wire.


    Technical Specifications
  • Domehead Terminals

    Polished Stainless steel - AISI 316

    Domehead terminals by Blue Wave are engraved with wire size and swage depth marking, making them easier to work with and to press or swage onto the wire.


    Technical Specifications
  • Domehead Terminal – Small

    Stainless steel - AISI 316

    The small domehead terminals are for lighter architectural fixing of wires. The focus of the design is the size. Overall dimensions have thus been reduced to a minimum, leaving markings out. The small fittings are suitable for hand crimping with Blue Wave Arctool ACC1 & Arctool8, see product page.


    Technical Specifications