Showing 1–24 of 28 results

  • WDS Ball

    Stainless steel - AISI 316

    The range of WDS balls are used as stop ends to various wire fittings. They are also ideally suited for angled installation of wires.


    Technical Specifications
  • Ball For Domehead Screw

    Stainless steel - AISI 316

    The range of WDS balls are used as stop ends to various wire fittings. They are also ideally suited for angled installation of wires.


    Technical Specifications
  • Domehead Screw

    Stainless steel - AISI 316

    Threaded domehead screws can be used for end termination and adjustment of a wire e.g. combined with inside thread terminals. The ball for domehead is particularly useful for angled installations.


    Technical Specifications
  • Ball For Domehead Terminal

    Stainless steel - AISI 316

    The range of WDS balls are used as stop ends to various wire fittings. They are also ideally suited for angled installation of wires.


    Technical Specifications
  • Domehead Terminals

    Polished Stainless steel - AISI 316

    Domehead terminals by Blue Wave are engraved with wire size and swage depth marking, making them easier to work with and to press or swage onto the wire.


    Technical Specifications
  • Flexible Angle Hinge

    Stainless steel - AISI 316

    The flexible angle hinge offers an elegant and 100% correct angle to all diagonal tensioned wires from 3 – 6 mm. To adjustment there is a right handed thread inside the shaft.

    Sleeve for WDS Ball


    Technical Specifications
  • Stopper

    Stainless steel - AISI 316

    Stoppers are used on both horizontal and vertical wires.


    Technical Specifications
  • Stopper

    Stainless steel - AISI 304 - Inside jaws for better grip

    Stoppers are used on both horizontal and vertical wires. They come in two parts for easy installation; have small teeth inside and thus a better grip when load is applied.


    Technical Specifications
  • Flexible Net Clip

    Stainless steel - AISI 316

    Net Clips are used where crossed wires need connection e.g. for wire nets. They are supplied in two versions – one with through-going thread, and one without.


    Technical Specifications
  • Net Clips

    Stainless steel - AISI 316

    Net Clips are used where crossed wires need connection e.g. for wire nets. They are supplied in two versions – one with through-going thread, and one without.


    Technical Specifications
  • Dual Thread Screw

    Stainless Steel - AISI 304

    The dual thread pin allows direct installation into wood and if combined with the correct raw plug it is attachable to almost any wall. Ideal for inside thread solutions.


    Technical Specifications
  • Dual Thread Screw Tong

    WDS Tool for dualscrew


    Technical Specifications
  • Rampa Screw

    Stainless Steel - AISI 316

    Rampa screw with inside thread left and right for anchoring into wood. Alloes “hidden” adjustment of M5 – M8 threaded parts.
    Inside allen key!


    Technical Specifications
  • Screw Eyes

    Stainless Steel - AISI 304

    The screw eyes can be directly installed in wood and if combined with the correct raw plug can be attached to almost any wall. Use it as a small eyebolt for attachment to forks, toggle forks, shackles etc.


    Technical Specifications
  • Wire Rope Clips

    DIN 741 - AISI 316

    Clamps are used for making wire loops, with or without thimbles, on site


    Technical Specifications
  • Clamps

    SIMPLEX - AISI 316

    Clamps are used for making wire loops, with or without thimbles, on site.


    Technical Specifications
  • Clamps

    DUPLEX - AISI 316

    Clamps are used for making wire loops, with or without thimbles, on site.


    Technical Specifications
  • WDS 3MM Wire Shelf Components

    Polished - AISI 304

    Single Glass Grip – Horizontal

    Components for the purpose of building a shelf out of wire.


    Technical Specifications
  • WDS 3MM Wire Shelf Components

    Polished - AISI 304

    Single Glass Grip – Swirwel

    Components for the purpose of building a shelf out of wire.


    Technical Specifications
  • WDS 3MM Wire Shelf Components

    Polished - AISI 304

    Single Wood Grip – Swirwel

    Components for the purpose of building a shelf out of wire.


    Technical Specifications
  • Cover Disk

    Stainless Steel – AISI 316

    The final touch to a installation may be given by use of a cover disk. The WDS cover disk is “heavy” machined and has a raised edge .


    Technical Specifications
  • Clevis Pin

    Polished Stainless Steel – AISI 316

    Pins and G-rings are spare parts for the WDS program.


    Technical Specifications
  • Split Pins

    Stainless Steel – AISI 316

    Metal fastener with two tines that are typically bent during installation.


    Technical Specifications
  • G-Ring

    Stainless Steel – AISI 316

    G-ring is designed as a locking mechanism for a clevis pin, safety bolt or similar fitting.


    Technical Specifications